View SGM8302_8214621.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

sgm8301/2/4 100mhz, high voltage, rail-to-rail output amplifiers general description the sgm8301 (single), SGM8302 (dual) and sgm8304 (quad) are unity gain stable devices that combine high speed performance and rail-to- rail outputs. these devices are targeted for applications where an input or an output is exposed to the outside world, such as video and communications. these devices can operate from 2.25v to 6v dual power supplies or from +4.5v to +12v single supplies. the common mode input voltage range extends to the negative power-supply rail (ground in single-supply applications). the sgm8301/2/4 consume only 8.5ma of quiescent supply current per amplifier while achieving a 100mhz -3db bandwidth, 56mhz small signal bandwidth for -0.1db gain flatness, and a 155v/s slew rate. the sgm8301 single is available in green sot-23-5, msop-8 and soic-8 packages. the SGM8302 dual is available in green soic-8 and msop-8 packages. the sgm8304 quad is available in green soic-14 and tssop-14 packages. the sgm8301/2/4 are specified over the extended -40 to +85 temperature range. features ? +4.5v to +12v single supplies or 2.25v to 6v dual power supplies ? high speed 100mhz -3db bandwidth 56mhz -0.1db gain flatness 155v/s slew rate ? rail-to-rail output ? low differential gain/phase: 0.02%/0.02 ? high output drive: 103ma ? -40 to +85 operating temperature range ? small packaging: sgm8301 available in sot-23-5, soic-8 and msop-8 SGM8302 available in msop-8 and soic-8 sgm8304 available in soic-14 and tssop-14 applications video line driver video-on-demand set-top boxes surveillance video systems analog-to-digital converter interface ccd imaging systems digital cameras rev. a. 2 sg micro corp www.sg-micro.com
100mhz, high voltage, sgm8301/2/4 rail-to-rail output amplifiers 2 sg micro corp www.sg-micro.com package/ordering information model order number package description package option marking information sgm8301ys8g/tr soic-8 tape and reel, 2500 sgm8301ys8 sgm8301yms8g/tr msop-8 tape and reel, 3000 sgm8301yms8 sgm8301 sgm8301yn5g/tr sot-23-5 tape and reel, 3000 sa6xx SGM8302ys8g/tr soic-8 tape and reel, 2500 SGM8302ys8 SGM8302 SGM8302yms8g/tr msop-8 tape and reel, 3000 SGM8302yms8 sgm8304ys14g/tr soic-14 tape and reel, 2500 sgm8304ys14 sgm8304 sgm8304yts14g/tr tssop-14 tape and reel, 3000 sgm8304yts14 note: package marking is defined as the follow: marking information for example: sa6ca (2012, january) sa6 x x date code - year ("a" = 2010, "b" = 2011 ) date code - month ("a" = jan. "b" = feb. "l" = dec.) chip i.d. absolute maximum ratings supply voltage (+v s to -v s ) ??........................-0.3v to +13.2v in_+, in_-, out_ ?..........................(-v s - 0.3v) to (+v s + 0.3v) differentia input voltage ............. ............... ............... .........2.5v operating temperature range ...........................-40c to +85c junction temperature..................................................... +150c storage temperature range ............................-65c to +150c lead temperature (soldering, 10s) ................................+260c esd susceptibility hbm (sgm8301/4)............ ................... ................ .............3000v hbm (SGM8302)........... ................. ...................... .............2000v mm......................................................................................250v note: stresses beyond those listed under ?absolute maximum ratings? may cause permanent damage to the device. these are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the s pecifications is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. caution this integrated circuit can be damaged by esd if you don?t pay attention to esd protection. sgmicro recommends that all integrated circuits be handled with appropriate precautions. failure to observe proper handling and installation procedures can cause damage. esd damage can range from subtle performance degradation to complete device failure. precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. sgmicro reserves the right to make any change in circuit design, specification or other related things if necessary without notice at any time. please contact sgmicro sales office to get the latest datasheet.
100mhz, high voltage, sgm8301/2/4 rail-to-rail output amplifiers 3 sg micro corp www.sg-micro.com pin configurations (top view) 5 6 7 8 1 2 3 4 +v s nc nc = no connect in- in+ -v s nc nc out soic-8/msop-8 sgm8301 +v s in- 3 4 5 1 2 -v s in+ sot-23-5 out sgm8301 5 6 7 8 1 2 3 4 outb inb+ ina- ina+ -v s outa +v s inb- soic-8/msop-8 SGM8302 + _ + _ outa ina- ina+ +v s inb- inb+ outb outd ind- ind+ -v s inc- inc+ outc 1 2 3 4 5 6 7 8 9 10 11 12 soic-14/tssop-14 + - - + - + - + sgm8304 13 14
100mhz, high voltage, sgm8301/2/4 rail-to-rail output amplifiers 4 sg micro corp www.sg-micro.com electrical characteristics: v s = +5v (at t a = +25 , v cm = v s /2, v out = v s /2 and r l = 100 ? to v s /2, unless otherwise noted.) parameter conditions min typ max units dc performance quiescent current/amplifier (i q ) i out = 0ma 7.5 10.2 ma -18 5 18 input offset voltage (v os ) t a = -4 0 to +85 -21.5 21.5 mv input offset voltage drift ( v os / t ) 12 v/ r l = 50 ? , 1.3v v out 3.7v 88 r l = 150 ? , 0.6v v out 4.4v 82 100 open-loop gain (a ol ) r l = 2k ? , 0.4v v out 4.6v 85 105 db power supply rejection ratio (psrr) v s = 4.5v to 13.2v 65 80 db common mode rejection ratio (cmrr) v cm = -0.1v to 2.75v 58 75 db r l = 2k ? to v s /2 60 115 r l = 150 ? to v s /2 405 517 r l = 75 ? to v s /2 700 mv high output voltage swing from rail (v oh ) r l = 75 ? to ground 1.515 v r l = 2k ? to v s /2 33 49.5 r l = 150 ? to v s /2 340 428 r l = 75 ? to v s /2 600 low output voltage swing from rail (v ol ) r l = 75 ? to ground 3.2 mv r l = 75 ? to v s , sink 39.5 50 output current (i out ) r l = 75 ? to ground, source 37 47 r l = 10 ? to v s , sink 100 output short circuit current (i sc ) r l = 10 ? to ground, source 75 ma ac performance small-signal -3db bandwidth (bw ss ) g = +1 110 large-signal -3db bandwidth (bw ls ) g = +1 51 small-signal bandwidth for -0.1db gain flatness (bw 0.1dbss ) g = +1 52 large-signal bandwidth for -0.1db gain flatness (bw 0.1dbls ) g = +1 32 mhz gain-bandwidth product (gbp) g = +100 57 mhz phase margin (pm) g = +100 44 degrees channel-to-channel crosstalk v in = 200mv p-p , f = 1khz 106 db overload recovery time (ort) f = 1khz 115 ns f = 1khz 175 voltage noise density (e n ) f = 10khz 65 nv/ h z slew rate (sr) up f = 1khz, 2v p-p output 115 v/ s slew rate (sr) down f = 1khz, 2v p-p output 140 v/ s settling time to 0.1% (t s ) f = 1khz, 2v p-p output 65 ns rise/fall time (t r /t f ) f = 1khz, v out = 100mv p-p 7.8 ns differential gain error (dg) ntsc 0.09 % differential phase error (dp) ntsc 0.4 degrees
100mhz, high voltage, sgm8301/2/4 rail-to-rail output amplifiers 5 sg micro corp www.sg-micro.com electrical characteristics: v s = 6v (at t a = +25 , v cm = 0v, v out = 0v and r l = 100 ? to ground, unless otherwise noted.) parameter conditions min typ max units dc performance quiescent current/amplifier (i q ) i out = 0ma 8.5 11.3 ma -18 5 18 input offset voltage (v os ) t a = -4 0 to +85 -21.5 21.5 mv input offset voltage drift ( v os / t ) 11 v/ r l = 150 ? , -4.5v v out 4.5v 85 94 open-loop gain (a ol ) r l = 2k ? , -4.9v v out 4.9v 90 110 db common mode rejection ratio (cmrr) v cm = -6.1v to 3.75v 66 82 db r l = 2k ? to ground 90 147 high output voltage swing from rail (v oh ) r l = 150 ? to ground 760 956 mv r l = 2k ? to ground 87 116 low output voltage swing from rail (v ol ) r l = 150 ? to ground 888 1080 mv r l = 75 ? to v s 71 103 output current (i out ) r l = 75 ? to -v s 53 90 ma ac performance small-signal -3db bandwidth (bw ss ) g = +1 100 large-signal -3db bandwidth (bw ls ) g = +1 44 small-signal bandwidth for -0.1db gain flatness (bw 0.1dbss ) g = +1 56 large-signal bandwidth for -0.1db gain flatness (bw 0.1dbls ) g = +1 30 mhz gain-bandwidth product (gbp) g = +100 60 mhz phase margin (pm) g = +100 42 degrees channel-to-channel crosstalk v in = 200mv p-p , f = 1khz 106 db overload recovery time (ort) f = 1khz 54 ns f = 1khz 174 voltage noise density (e n ) f = 10khz 65 nv/ h z slew rate (sr) up f = 1khz, 2v p-p output 145 v/ s slew rate (sr) down f = 1khz, 2v p-p output 155 v/ s settling time to 0.1% (t s ) f = 1khz, 2v p-p output 84 ns rise/fall time (t r /t f ) f = 1khz, v out = 100mv p-p 7.5 ns differential gain error (dg) ntsc 0.02 % differential phase error (dp) ntsc 0.02 degrees
100mhz, high voltage, sgm8301/2/4 rail-to-rail output amplifiers 6 sg micro corp www.sg-micro.com typical performance characteristics at t a = +25c, +v s = +5v, -v s = -5v, v cm = 0v and r l = 100 ? to gnd, unless otherwise noted. small signal gain flatness vs. frequency -2.1 -1.6 -1.1 -0.6 -0.1 0.4 0.9 0.1 1 10 100 1000 frequency (mhz) gain (db) v out = 100mv p-p largel signal gain flatness vs. frequency -2.1 -1.6 -1.1 -0.6 -0.1 0.4 0.9 0.1 1 10 100 1000 frequency (mhz) gain (db) v out = 2v p-p gain and phase vs. frequency -50 -30 -10 10 30 50 0.1 1 10 100 1000 frequency (mhz) gain (db) -120 -40 40 120 200 -200 phase (degrees) gain phase small signal gain vs. frequency -15 -12 -9 -6 -3 0 3 6 0.1 1 10 100 1000 frequency (mhz) gain (db) v out = 100mv p-p largel signal gain vs. frequency -15 -12 -9 -6 -3 0 3 6 0.1 1 10 100 1000 frequency (mhz) gain (db) v out = 2v p-p voltage noise vs. frequency 0 50 100 150 200 250 300 350 400 450 500 0.01 0.1 1 10 100 frequency (khz) voltage noise (nv/ hz)
100mhz, high voltage, sgm8301/2/4 rail-to-rail output amplifiers 7 sg micro corp www.sg-micro.com typical performance characteristics at t a = +25c, +v s = +5v, -v s = -5v, v cm = 0v and r l = 100 ? to gnd, unless otherwise noted. small signal pulse response time (25ns/div) g = +1 v out = 100mv p-p f = 5mhz input 50mv/div output 50mv/div small signal pulse response time (25ns/div) g = +2 v out = 100mv p-p f = 5mhz input 50mv/div output 50mv/div small signal pulse response time (25ns/div) g = +5 v out = 100mv p-p f = 5mhz input 50mv/div output 50mv/div large signal pulse response time (25ns/div) g = +1 v out = 1v p-p f = 5mhz input 500mv/div output 500mv/div large signal pulse response time (25ns/div) g = +2 v out = 1v p-p f = 5mhz input 500mv/div output 500mv/div large signal pulse response time (25ns/div) g = +5 v out = 1v p-p f = 5mhz input 500mv/div output 500mv/div
100mhz, high voltage, sgm8301/2/4 rail-to-rail output amplifiers 8 sg micro corp www.sg-micro.com typical performance characteristics at t a = +25c, +v s = +5v, -v s = -5v, v cm = 0v and r l = 100 ? to gnd, unless otherwise noted. psrr+ vs. frequency -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 1 10 100 1000 10000 100000 frequency (khz) psrr+ (db) cmrr vs. frequency -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 1 10 100 1000 10000 100000 frequency (khz) cmrr (db) psrr- vs. frequency -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 1 10 100 1000 10000 100000 frequency (khz) psrr- (db)
100mhz, high voltage, sgm8301/2/4 rail-to-rail output amplifiers 9 sg micro corp www.sg-micro.com typical application circuit in + _ 200 out 200 75 75 z 0 = 75 figure 1. video line driver application layout and power supply bypassing the sgm8301/2/4 operate from single +4.5v to +12v or from dual 2.25v to 6v supplies. bypass each supply with a 0.1f capacitor as close to the pin as possible. sgmc recommends using micro-strip and stripline techniques to obtain full bandwidth. to ensure that the pc board does not degrade the amplifier?s performance, design it for a frequency greater than 1ghz. pay careful attention to inputs and outputs to avoid large parasitic capacitance. whether or not you use a constant impedance board, observe the following design guidelines: ? do not use wire-wrap boards; they are too inductive. ? do not use ic sockets; they increase parasitic capacitance and inductance. ? use surface-mount instead of through-hole components for better, high frequency performance. ? use a pc board with at least two layers; it should be as free from voids as possible. ? keep signal lines as short and as straight as possible. do not make 90 turns; round all corners.
100mhz, high voltage, sgm8301/2/4 rail-to-rail output amplifiers 10 sg micro corp www.sg-micro.com package outline dimensions sot-23-5 e e1 e e1 b d a1 a2 a c l 0.2 recommended land pattern (unit: mm) 1.90 2.59 0.99 0.69 0.95 dimensions in millimeters dimensions in inches symbol min max min max a 1.050 1.250 0.041 0.049 a1 0.000 0.100 0.000 0.004 a2 1.050 1.150 0.041 0.045 b 0.300 0.500 0.012 0.020 c 0.100 0.200 0.004 0.008 d 2.820 3.020 0.111 0.119 e 1.500 1.700 0.059 0.067 e1 2.650 2.950 0.104 0.116 e 0.950 bsc 0.037 bsc e1 1.900 bsc 0.075 bsc l 0.300 0.600 0.012 0.024 0 8 0 8
100mhz, high voltage, sgm8301/2/4 rail-to-rail output amplifiers 11 sg micro corp www.sg-micro.com package outline dimensions soic-8 d e e1 e b a a2 a1 c l 1.27 0.6 2.2 5.2 recommended land pattern (unit: mm) dimensions in millimeters dimensions in inches symbol min max min max a 1.350 1.750 0.053 0.069 a1 0.100 0.250 0.004 0.010 a2 1.350 1.550 0.053 0.061 b 0.330 0.510 0.013 0.020 c 0.170 0.250 0.006 0.010 d 4.700 5.100 0.185 0.200 e 3.800 4.000 0.150 0.157 e1 5.800 6.200 0.228 0.244 e 1.27 bsc 0.050 bsc l 0.400 1.270 0.016 0.050 0 8 0 8
100mhz, high voltage, sgm8301/2/4 rail-to-rail output amplifiers 12 sg micro corp www.sg-micro.com package outline dimensions msop-8 e1 e e d a1 l c a a2 b recommended land pattern (unit: mm) 1.02 0.41 0.65 4.8 dimensions in millimeters dimensions in inches symbol min max min max a 0.820 1.100 0.032 0.043 a1 0.020 0.150 0.001 0.006 a2 0.750 0.950 0.030 0.037 b 0.250 0.380 0.010 0.015 c 0.090 0.230 0.004 0.009 d 2.900 3.100 0.114 0.122 e 2.900 3.100 0.114 0.122 e1 4.750 5.050 0.187 0.199 e 0.650 bsc 0.026 bsc l 0.400 0.800 0.016 0.031 0 6 0 6
100mhz, high voltage, sgm8301/2/4 rail-to-rail output amplifiers 13 sg micro corp www.sg-micro.com package outline dimensions soic-14 dimensions in millimeters dimensions in inches symbol min mod max min mod max a 1.35 1.75 0.053 0.069 a1 0.10 0.25 0.004 0.010 a2 1.25 1.65 0.049 0.065 a3 0.55 0.75 0.022 0.030 b 0.36 0.49 0.014 0.019 d 8.53 8.73 0.336 0.344 e 5.80 6.20 0.228 0.244 e1 3.80 4.00 0.150 0.157 e 1.27 bsc 0.050 bsc l 0.45 0.80 0.018 0.032 l1 1.04 ref 0.040 ref l2 0.25 bsc 0.01 bsc r 0.07 0.003 r1 0.07 0.003 h 0.30 0.50 0.012 0.020 0 8 0 8 recommended land pattern (unit: mm) d e1 e l1 l2 a 3 a a 2 5.2 1.27 0.6 2.2 e b a 1 index 0.80.1 dep 0.20.1 2.00.1 btm e-mark dep 0.10.05 l h h r r1
100mhz, high voltage, sgm8301/2/4 rail-to-rail output amplifiers 14 sg micro corp www.sg-micro.com package outline dimensions tssop-14 e e1 d b a a1 a2 l c h e recommended land pattern (unit: mm) 5.94 0.42 1.78 0.65 dimensions in millimeters dimensions in inches symbol min max min max a 1.100 0.043 a1 0.050 0.150 0.002 0.006 a2 0.800 1.000 0.031 0.039 b 0.190 0.300 0.007 0.012 c 0.090 0.200 0.004 0.008 d 4.900 5.100 0.193 0.201 e 4.300 4.500 0.169 0.177 e1 6.250 6.550 0.246 0.258 e 0.650 bsc 0.026 bsc l 0.500 0.700 0.02 0.028 h 0.25 typ 0.01 typ 1 7 1 7
100mhz, high voltage, sgm8301/2/4 rail-to-rail output amplifiers 15 sg micro corp www.sg-micro.com tape and reel information note: the picture is only for reference. please make the object as the standard. key parameter list of tape and reel package type reel diameter reel width w1 (mm) a0 (mm) b0 (mm) k0 (mm) p0 (mm) p1 (mm) p2 (mm) w (mm) pin1 quadrant sot-23-5 7 9.5 3.17 3.23 1.37 4.0 4.0 2.0 8.0 q3 soic-8 13 12.4 6.4 5.4 2.1 4.0 8.0 2.0 12.0 q1 msop-8 13 12.4 5.2 3.3 1.5 4.0 8.0 2.0 12.0 q1 soic-14 13 16.4 6.6 9.3 2.1 4.0 8.0 2.0 16.0 q1 tssop-14 13 12.4 6.95 5.6 1.2 4.0 8.0 2.0 12.0 q1 reel width (w1) reel diameter reel dimensions tape dimensions direction of feed p2 p0 w p1 a0 k0 b0 q1 q2 q4 q3 q3 q4 q2 q1 q3 q4 q2 q1
100mhz, high voltage, sgm8301/2/4 rail-to-rail output amplifiers 16 sg micro corp www.sg-micro.com carton box dimensions note: the picture is only for reference. please make the object as the standard. key parameter list of carton box reel type length (mm) width (mm) height (mm) pizza/carton 7 (option) 368 227 224 8 7 442 410 224 18 13 386 280 370 5

▲Up To Search▲

Price & Availability of SGM8302

	To Download SGM8302 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .